Netgear XET1001 User Manual download pdf (Page 22)

XET1001 Wall-Plugged Ethernet Adapter User Guide

v1.0, January 2008

If the Power LED still does not come on, and you have confirmed the power outlet is live, you

have a hardware problem and should contact technical support.

HomePlug Light Not On

If the power light is on but the HomePlug light is not, check the following:

• Make sure that power is being provided to more than one PowerLine device. Another

PowerLine device must be installed for successful communication across the PowerLine.

• Verify that the network password is the same on all devices in the PowerLine network.

Ethernet Light is Off

• Make sure that the Ethernet cable is plugged in properly at both ends.

• Be sure that you are using the correct cable on the router that the first PowerLine adapter is

connected to. When connecting the router’s Internet port to a cable or DSL modem, use the

cable that was supplied with the cable or DSL modem. This cable could be a standard straight-

through Ethernet cable or an Ethernet crossover cable.

• On the attached Ethernet device or network adapter card, check that the Link light is on.

1 2 ... 17 18 19 20 21 22 23 24 25 26

No comments

Netgear XET1001 User Manual Page 22