Netgear XAVB5101-100PAS User Manual download pdf (Page 6)

6 | Chapter 1. Getting Started

Powerline 500 Nano XAVB5101

Buttons

Two buttons are located on the side of the adapter:

• Security. After you plug in your new AV adapters, press the Security button for 2

seconds on both of the AV adapters. Both buttons must be pressed within 2 minutes.

Note: The Security button does not work in power saving mode. The unit

enters power saving mode if the Ethernet port is idle (not linked) for more than

10 minutes.

• Reset. Press the Reset button for 1 second, then release to return the Powerline adapter

to its factory default settings.

Ethernet Port

Plug one end of the Ethernet cable that comes with the Powerline 500 Nano XAVB5101 into

this port and the other end either into your router, or into the computer or other peripheral

devices.

Powerline Adapter Label

The product label shows unique details specific to your adapter. The product label is located

on the back of the adapter. The label contains the following information.

• Model number

• MAC address

• Device password

• Serial number

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

No comments

Netgear XAVB5101-100PAS User Manual Page 6