Netgear GS748T User Manual download pdf (Page 19)

GS748T Smart Switch Hardware Installation Guide

Physical Description 2-3

v1.0, January 2007

Reset Button

The Reset button of the GS748T triggers a hardware reset of the switch. Figure 2-3 shows its

location on the front panel. This action is equivalent to switching the unit power off and back on.

The last saved configuration is loaded into the switch as it resets. To operate the reset button, insert

a device such as a paper clip into the opening to press the recessed button. The front-panel LEDs

should extinguish and light again as the switch performs its Power On Self Test (POST).

Table 2-1. Front Panel LEDs

Label Color Activity Description

Power Green

On Power is supplied to the switch

Off Power is disconnected

Speed/Link/ACT

Green

On A valid 1000Mbps link is established on

the port

Blinking Data transmission is occurring at

1000Mbps on the port

Yellow On A valid 10/100Mbps link is established

on the port

None Off No 10/100/1000Mbps link is

established on the port

SFP (MiniGBIC) Link/Act Green

On A valid 1000Mbps link is established on

the port

Off No valid link is established on the port

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

No comments

Netgear GS748T User Manual Page 19