Netgear GS748T User Manual download pdf (Page 27)

GS748T Smart Switch Hardware Installation Guide

Installation 4-3

v1.0, January 2007

4. Support the weight of the switch and use four pan-head screws with nylon washers to attach it

to the rack; use a #2 Phillips screwdriver to tighten the screws.

Figure 4-1 Mounting the Switch in a Rack

Step 3: Checking the Installation

Before you apply power, inspect the equipment thoroughly to:

• Verify that all cables are installed correctly.

• Check that cables are not damaged and that cable routing does not interfere with equipment to

create a safety hazard.

• Ensure that all equipment is mounted properly and securely.

Step 4: Connecting Devices to the Switch

The following procedure describes how to connect devices to the switch’s RJ-45 ports. Your

NETGEAR GS748T Gigabit Smart Switch contains Auto Uplink technology, which enables you

to attach devices using either straight-through or crossover cables.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

No comments

Netgear GS748T User Manual Page 27