Netgear GS748T User Manual download pdf (Page 13)

GS748T Smart Switch Hardware Installation Guide

Introduction 1-3

v1.0, January 2007

Features

The following list identifies the key features of the NETGEAR GS748T Gigabit Smart Switch.

• Forty-eight 10/100/1000 Mbps auto-sensing Gigabit-Ethernet switching ports

• Four SFP GBIC combo Gigabit Ethernet slots for optional fiber connectivity

•Reset Button

• Factory Defaults Button

• Administrative switch management

• IEEE 802.1Q Tag VLAN with up to 48 VIDs ranging in 2 to 4K

• IEEE 802.1p QoS support, two priority queues per port

• Port-based VLAN with up to 48 groups; any one port can belong to different VLAN

groups

• IEEE 802.3ad Link Aggregation support

• Embedded HTTP server for Web-based management

• Supports port-setting function, enabling user to enable/disable each port, and set speed,

duplex mode and device flow control

• Auto-Discovery support with application program for discovering and managing the smart

switches on the network

• Flash upgrade, configuration backup/restore, and factory reset

• Full compatibility with IEEE standards:

• IEEE 802.3i (10BASE-T)

• IEEE 802.3u (100BASE-TX)

• IEEE 802.3z/ab (1000BASE-X, 1000Base-T)

• IEEE 802.3x (full-duplex flow control)

• Auto-sense and auto-negotiate for all ports

• Auto Uplink on all ports for the right connection sense

• Integrated address Look-Up Engine supports 8K absolute MAC addresses

• Full- and half-duplex functions for all 10/100/1000 ports

• Store-and-Forward transmission to remove bad packets from the network

• Active flow control to minimize packet loss/frame drops:

• Half-duplex back-pressure control

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

No comments

Netgear GS748T User Manual Page 13