Netgear GS724T User Manual download pdf (Page 13)

GS716T/GS724T Hardware Installation Guide

Physical Description 2-7

v1.0, January 2011

• System LEDs

Figure 2-4 illustrates the NETGEAR GS724T Smart Switch back panel:

The back panel contains the following:

• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for

accommodating the supplied power cord.

LED Designations

Port LEDs

The following table describes the port LED designations.

Figure 2-4

Table 2-1. Port LEDs

Port LED Designation

16/24-10/100/1000 Mbps

Ports - 3 LEDs per port

LINK/ACT

SPD

FDX

• Solid Green - A valid 1000 Mbps link is

established on the port.

• Flashing Green - Packet transmission or

reception is occurring on the port at

1000 Mbps.

• Solid Yellow - A valid 10/100 Mbps link is

established on the port.

• Flashing Yellow - Packet transmission or

reception is occurring on the port at 10/

100 Mbps.

• Off - No 10/100 Mbps link is established on

the port.

• Solid Green - Full-duplex link is established

on the port.

• Off - No full-duplex or half-duplex link is

established on the port.

RS-232 Power Connector

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Netgear GS724T User Manual Page 13