Netgear FS518T User Manual download pdf (Page 27)

installation 4-5

Connecting Devices to the Switch

To connect devices to the switch:

1. Connect the devices to the 10/100 Mbps ports on the switch,using Category 5

UTP cable.

Note:Ethernet specifications limit the cable length between your PC or server

and the switch to 328 feet (100 meters) in length.

2. Connect one end of the Category 5 UTP cable to the Gigabit uplink port and the

other end to the linking server or network device.

Note:Gigabit copper over Category 5 cable needs to meet the requirements

specified in Appendix C.

3. Connect one end of the AC power cord to the power outlet on the rear panel of

the switch and the other end of the AC power cord to the wall outlet.

Refer to Figure 4-2 on page 4-6 when connecting the Model FS518T switch.



FS518T.Manual.FINAL 5/19/00 12:55 PM Page 29

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

No comments

Netgear FS518T User Manual Page 27