Netgear FS518T User Manual download pdf (Page 15)

physical description 2-2

As Figure 2-1 shows,the Model FS518T switch is equipped with 16 auto-sensing

10/100 Mbps Fast Ethernet UTP ports.The network access speed for the

10/100 Mbps ports is automatically sensed and displayed on the front panel by

the 10 Mbps or 100 Mbps Link LEDs.

The 10/100 Mbps ports support only UTP cable using an 8-pin RJ-45 plug.

Each of the 10/100 Mbps ports uses vista RJ-45 connectors that have built-in

LEDs,as illustrated in Figure 2-2.The LEDs,as described in Table 2-1 on page 2-5,

indicate that the connection to the port is valid and that the port is operating at

either 10 or 100 Mbps.

For further information about the vista RJ-45 connector and the RJ-45 plug,refer

to Appendix B,“Connector Pin Assignments,”and Appendix C,“Cabling Guidelines.”

Key:

1 = 100M Link LED

2 = 10M Link LED

Figure 2-2. Vista RJ-45 Connector with Built-in LEDs

735EA

1 2

FS518T.Manual.FINAL 5/19/00 12:55 PM Page 16

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 44 45

No comments

Netgear FS518T User Manual Page 15