Netgear FS518T User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 45
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
physical description 2-5
Table 2- 1 describes each LED on the front panel of the Model FS518T switch.
Table 2-1. LED Descriptions
Color Activity Description
Green On Power is supplied to the switch.
Off Power is disconnected.
Green Blinking Packet transmission or reception is occurring on
the port.The blinking action corresponds to the
number of packets that are transmitted or received.
Off No packet transmission or reception is
occurring on the port.
Green On A full-duplex link is established on the port.
Yellow On A half-duplex link is established on the
port,and the port is experiencing collisions.
(Note that occasional collisions are normal.)
Off No full-duplex link is established,or no collisions
are occurring on the port when operating in
half-duplex mode.
Green On A valid 100 Mbps link is established on the port.
Off No 100 Mbps link is established on the port.
Green On A valid 10 Mbps link is established on the port.
Off No 10 Mbps link is established on the port.
Green On A valid 1000 Mbps link is established on the port.
Off No 1000 Mbps link is established on the port.
Green On A valid 100 Mbps link is established on the port.
Off No 100 Mbps link is established on the port.
Label
Power
Rx/Tx
FDX/COL
100M Link (located
at the top left corner
each 10/100 Mbps
UTP port)
10M Link (located at
the top right corner
of each 10/100 Mbps
UTP port)
1000M Link (located
at the top left corner of
each 100/1000 Mbps
UTP port)
100M Link (located at
the top right corner of
each 100/1000 Mbps
UTP port)
FS518T.Manual.FINAL 5/19/00 12:55 PM Page 19
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 44 45

Comments to this Manuals

No comments