Netgear FS518T User Manual download pdf (Page 24)

installation 4-2

Call your reseller or customer support in your area if there are any wrong,missing,

or damaged parts.Refer to the enclosed Customer Support Information Card for

more information.

Keep the carton, including the original packing materials.Use them to repack the

switch if you need to return it for repair.

To qualify for product updates and product warranty registration, fill in the

Warranty & Owner Registration Card within 30 days of purchase and return it

to NETGEAR, Inc.

Installing a Switch

To install a switch on a desktop, on another flat surface,or in a rack:

1. Unpack the switch.

2. Choose a location near the devices to be connected and close to an

electrical outlet.

3. Proceed to “Installing the Switch on a Flat Surface”or “Installing the Switch

in a Rack.”

Installing the Switch on a Flat Surface

To install the switch on a desktop or any other flat surface:

1. Install self-adhesive rubber footpads on the bottom of the switch.

Peel off the protective backing from the rubber pads and apply one at each

marked location on the bottom of the switch.

2. Set the switch on a desktop or any other flat surface.

For proper ventilation,make sure that the switch has at least 2 inches of space on

each side and 5 inches of space at the back.It is very important that the fans

located in the rear panel are not blocked.

Caution:Restricted airflow could cause overheating of the components.

FS518T.Manual.FINAL 5/19/00 12:55 PM Page 26

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 44 45

No comments

Netgear FS518T User Manual Page 24