Netgear Cable/DSL ProSafe Firewall FR328S User Manual Page 80
- Page / 135
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
7-4 Advanced Configuration
M-10207-01, Reference Manual v2
DHCP
By default, the firewall will function as a DHCP (Dynamic Host Configuration Protocol) server,
allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to
the router's LAN. The assigned default gateway address is the LAN address of the firewall. IP
addresses will be assigned to the attached PCs from a pool of addresses specified in this menu.
Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the firewall are satisfactory. See
“IP Configuration by DHCP” on page B-10” for an explanation of DHCP and information about
how to assign IP addresses for your network.
Use router as DHCP server
If another device on your network will be the DHCP server, or if you will manually configure the
network settings of all of your computers, clear the ‘Use router as DHCP server’ check box.
Otherwise, leave it checked.
Specify the pool of IP addresses to be assigned by setting the Starting IP Address and Ending IP
Address. These addresses should be part of the same IP address subnet as the firewall’s LAN IP
address. Using the default addressing scheme, you should define a range between 192.168.0.2 and
192.168.0.253, although you may wish to save part of the range for devices with fixed addresses.
The firewall will deliver the following parameters to any LAN device that requests DHCP:
• An IP Address from the range you have defined
• Subnet Mask
• Gateway IP Address is the firewall’s LAN IP address
• Primary DNS Server, if you entered a Primary DNS address in the Basic Settings menu;
otherwise, the firewall’s LAN IP address
• Secondary DNS Server, if you entered a Secondary DNS address in the Basic Settings menu
• WINS Server, s
hort for Windows Internet Naming Service Server, determines the IP
address associated with a particular Windows computer. A WINS server records and
reports a list of names and IP address of Windows PCs on its local network. If you
connect to a remote network that contains a WINS server, enter the server’s IP address
here. This allows your PCs to browse the network using the Network Neighborhood
feature of Windows.
- FR328S ProSafe Firewall 1
- Reference Manual v2 1
- Contents 5
- Glossary 10
- Chapter 1 11
- About This Manual 11
- How to Use this Manual 12
- How to Print this Manual 13
- Chapter 2 15
- Introduction 15
- Protocol Support 16
- Introduction 2-3 17
- What’s in the Box? 18
- The Firewall’s Front Panel 19
- The Firewall’s Rear Panel 20
- Chapter 3 21
- Configuration Requirements 22
- DSL modem 24
- 87654321 25
- IN TERN ET 25
- Figure 3-7: Setup Wizard 29
- 2. Click Next 29
- ISP Does Not Require Login 36
- ISP Does Require Login 36
- Chapter 4 39
- Serial Port Configuration 39
- Configuring Auto-Rollover 41
- How to Configure Dial-in 43
- Serial Connection 44
- 4-8 Serial Port Configuration 46
- Chapter 5 47
- Protecting Your Network 47
- Protecting Your Network 5-3 49
- Services 51
- Protecting Your Network 5-7 53
- Figure 5-5. Rules menu 53
- 5-8 Protecting Your Network 54
- Protecting Your Network 5-9 55
- 5-10 Protecting Your Network 56
- Protecting Your Network 5-11 57
- 5-12 Protecting Your Network 58
- Order of Precedence for Rules 59
- How to Set Your Time Zone 60
- 5-16 Protecting Your Network 62
- Chapter 6 63
- Managing Your Network 63
- 6-2 Managing Your Network 64
- Managing Your Network 6-3 65
- Viewing Attached Devices 66
- Managing Your Network 6-5 67
- 6-6 Managing Your Network 68
- Examples of log messages 69
- 6-8 Managing Your Network 70
- Managing Your Network 6-9 71
- Managing Your Network 6-11 73
- Figure 6-9: Diagnostics menu 73
- Enabling Remote Management 74
- How to Upgrade the Router 75
- 6-14 Managing Your Network 76
- Chapter 7 77
- Advanced Configuration 77
- Configuring LAN IP Settings 78
- MTU Size 79
- 7-4 Advanced Configuration 80
- Configuring Dynamic DNS 82
- How to Configure Dynamic DNS 83
- Using Static Routes 84
- 7-10 Advanced Configuration 86
- Chapter 8 87
- Troubleshooting 87
- Power LED Not On 88
- Troubleshooting 8-3 89
- Troubleshooting 8-5 91
- 8-6 Troubleshooting 92
- 3. Click on OK 92
- Troubleshooting 8-7 93
- Problems with Date and Time 94
- Appendix A 95
- Technical Specifications 95
- EN 55 022 (CISPR 22), Class B 96
- VCCI Class B 96
- Appendix B 97
- IP Addresses and the Internet 98
- Subnet Addressing 101
- Table 8-2. Netmask Formats 102
- Private IP Addresses 103
- Related Documents 105
- IP Configuration by DHCP 106
- Ethernet Cabling 107
- Category 5 Cable Quality 108
- Inside Twisted Pair Cables 109
- Appendix C 113
- Preparing Your Network 113
- C-2 Preparing Your Network 114
- C-8 Preparing Your Network 120
- Are Login Protocols Used? 121
- Restarting the Network 124
- Glossary 125
- 2 Glossary 126
- 4 Glossary 128
- 6 Glossary 130
- 8 Glossary 132
Related products and manuals for Hardware Netgear Cable/DSL ProSafe Firewall FR328S
Hardware Netgear ANT2405 User Manual
(7 pages)
(7 pages)
Hardware Netgear FVS328 User Manual
(2 pages)
(2 pages)
Hardware Netgear DG834GSP User Manual
(208 pages)
(208 pages)
Hardware Netgear MBR624GU User Manual
(106 pages)
(106 pages)
Hardware Netgear AGM721F User Manual
(1 pages)
(1 pages)
© 2020, manymanuals.com. All rights reserved. | 0.955 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals