Netgear Universal WiFi Range Extender WN2000RPT User Manual

Universal WiFi Range Extender WN2000RPT Installation GuideExtended Wireless RangeExisting Router RangeWIRELESS EXTENSIONEXISTINGROUTERWIRELEEXTENSCONN

103. The web browser setup guide walks you through the following steps:• Selecting the Wi-Fi network you would like to extend.• Entering the

11Extender PerformanceThe Link Rate LED indicates performance. • The best performance is delivered when the Link Rate LED is green. • A

12When to Use the Extender Wireless NetworkNETGEAR recommends that you connect to the Extender wireless network only when a PC or wireless device is i

134-Port Wi-Fi AdapterOnce the Extender is connected to your existing Wi-Fi network, you can use the Ethernet ports on the Extender to connect up to f

14Wireless SSIDs and PassphrasesUse the space below to record your new Extender network name (SSID) and Extender security settings, in case you need t

15Frequently Asked QuestionsYou can find more information about your product in the User Manual available at http://support.netgear.com.1. The Smart

ComplianceDeclarations of ConformityFor complete DoC please visit the NETGEAR EU Declarations of Conformity website at: http://kb.netgear.com/app/answ

© 2011 NETGEAR, Inc. All rights reserved.No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or tra

3Hardware FeaturesThe LEDs on the front show how the Extender is working. Link Rate. The LED indicates a wireless connection between

The back panel has the following features:Factory Reset button. To use this button, stick a paper clip into the reset hole and hold it until the Statu

5Getting StartedThe WiFi Range Extender extends the wireless network to include the area outside the range of your existing Wi-Fi network. Follow thes

6Connecting the Extender to an Existing Wi-Fi NetworkTo extend the range of your Wi-Fi network, you need to connect the Extender to your existing Wi-

7Option 1: Connecting with WPS (Wi-Fi Protected Setup)1. Press the WPS button on the Extender. 2. Within 2 minutes, press the WPS button on your

8Option 2: Connecting with web browser setup guide1. Once the Extender is powered on and the Status LED is green, use a wireless network manager o

92. Open a web browser window on the same PC, and the browser should take you directly to the onscreen setup guide.Tip: You can always access the Ex