Netgear Cable/DSL ProSafe Firewall FR328S User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 135
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
Introduction 2-5
M-10207-01, Reference Manual v2
The Firewall’s Front Panel
The front panel of the FR328S (Figure 2-1) contains status LEDs.
Figure 2-1: FR328S Front Panel
You can use some of the LEDs to verify connections. Table 2-1 lists and describes each LED on
the front panel of the firewall.
These LEDs are green when lit, except for the TEST LED, which is amber.
Table 2-1: LED Descriptions
Label Activity Description
POWER On Power is supplied to the firewall.
TEST On
Off
The system is initializing.
The system is ready and running.
MODEM On/Blinking The port detected a link with the Internet WAN connection or
Remote Access Server. Blinking indicates data transmission.
INTERNET
100 On/Blinking The Internet port is operating at 100 Mbps.
LINK/ACT (Activity) On/Blinking The port detected a link with the Internet WAN connection and is
operating at 10 Mbps. Blinking indicates data transmission.
LOCAL
100 On/Blinking The Local port is operating at 100 Mbps.
LINK/ACT
(Link/Activity)
On/Blinking The Local port has detected a link with a LAN connection and is
operating at 10 Mbps. Blinking indicates data transmission.
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 134 135

Comments to this Manuals

No comments