Netgear WPN824EXT Setup Guide download pdf (Page 36)

RangeMax WiFi Range Extender Setup Manual

32 Help with Troubleshooting

v1.0, March 2008

– Verify that the Ethernet card driver software and TCP/IP software are both installed

and configured on your computer.

– Verify that the IP address for your extender and your computer are correct and that the

addresses on both begin with 192.168.1.

Testing the Path from a PC to the Internet

After verifying that the path between your computer and the WiFi range extender works correctly,

test the path from your PC to the Internet.

1. From the Windows toolbar, click Start, and select Run.

2. In the field provided, type:

ping -n 10 <IP address>

where <IP address> is the IP address of a remote device such as your ISP’s DNS server.

If the path is functioning correctly, replies as in the previous section display. If you do not receive

replies:

• Make sure that the gateway/router has Internet access, and check whether other clients that are

connected with the gateway/router are functioning correctly.

• Check that your PC has the IP address of your gateway/router listed as the default gateway/

router.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Netgear WPN824EXT Setup Guide Page 36