Netgear WPN824EXT Setup Guide Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
RangeMax WiFi Range Extender Setup Manual
30 Help with Troubleshooting
v1.0, March 2008
3.
Verify that the WiFi range extender address (192.168.1.250) is listed by your computer as the
default gateway/router address.
My Wireless Performance Is Poor
If your wireless performance is poor, there are several potential causes.
To improve poor performance:
1.
Verify that you have disabled your ISP gateway/router/routers wireless feature (for help, go to
http://kbserver.netgear.com/products/WPN824EXT.asp, and click the link for your region).
2. Verify that your device is associated with the WiFi range extender. The Test light blinks slowly
if there is no wireless client associated with the extender.
I Need to Restore the Default Password and Configuration
Settings
This section explains how to restore the factory default configuration settings, changing the
extender’s administration password to password and the IP address to 192.168.1.250.
To restore the factory default configuration settings, use the restore factory settings button
on the rear panel of the extender:
1.
Use a sharp object like a pen or a paper clip to press and hold the restore factory settings
button for about 20 seconds (see “Extender Back Panel” on page 4), until the Test light on the
front turns on.
2. Release the restore factory settings button, and wait for the extender to restart.
The factory default WiFi range extender address is 192.168.1.250. However, if the
extender detects a conflict with the address it gets from your gateway/router, it
automatically picks a different address for itself. In this case, you can log in to the
extender using www.mywifiext.net to verify its LAN IP address. Select LAN IP
Setup under Advanced on the main menu. Take note of the LAN TCP/IP setup IP
address, which should match the default gateway/router IP address on your
computer.
This procedure will erase all the current configuration settings and restore the factory
defaults.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments