Netgear WN604 User's Guide download pdf (Page 48)

Advanced Configuration

Wireless N150 Access Point WN604

RIFS Transmission (11ng). Reduced interframe space transmission. RIFS transmissions

are shorter than other interframe spaces, and if enabled allow transmission of successive

frames at different transmit powers. The default is Disable.

DTIM Interval.

The delivery traffic indication message specifies the data beacon rate

between 1 and 255. The default is 3.

Preamble Type (11b//jointfilesconvert/22761/bg only). A long transmit preamble might provide a more reliable

connection or a slightly longer range. A short transmit preamble gives better performance.

The Auto settings automatically handles both long and short preambles. The default is Auto.

802.11d. Enable this option to include support for additional regulatory domains that are not

in the current standard.

Max Wireless Clients.

The number of wireless clients that can associate with the AP at one

time. The default is 20.

Advanced QoS Settings

Wireless Multimedia Extension (WME) or Wi-Fi Multimedia (WMM) is a subset of the 802.11e

standard. WME allows wireless traffic to have a range of priorities, depending on the type of

data. Time-dependent information, such as video or audio, has a higher priority than normal

traffic. For WME to function correctly, wireless clients also need to support WME.

For most networks, the default QoS queue parameter settings work well. Quality of Service

provides you with the ability to specify parameters on multiple queues for increased

throughput and better performance of dif

ferentiated wireless traffic, like Voice-over-IP (VoIP),

other types of audio, video, and streaming media, as well as traditional IP data.

 To configure advanced QoS settings

1. Select Configuration > W

ireless > Advanced > QoS Settings. The QoS Settings

screen displays:

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

No comments

Netgear WN604 User's Guide Page 48