Netgear WN604 User's Guide download pdf (Page 28)

Configure Security

Wireless N150 Access Point WN604

Note: WEP and TKIP provide only legacy rates of operation. So, AES is

the recommended solution to use the 802.11n rates and speed.

Manually Configure Security

The following sections explain how to manually configure security.

Note: If you use a wireless computer to change wireless security settings,

you will be disconnected when you click Apply. Reconfigure your

wireless adapter to match the new settings or access the access

point from a wired computer to make any further changes.

Configure WPA2, or WPA2 + WPA, or WPA

The process of setting up WPA2, WPA, or WPA2 + WPA is very similar. Consult the product

document for your wireless clients and for instructions on configuring client WPA2 settings.

 To configure WPA2, or WPA2 + WPA, or WPA in the access point:

1. Select Configuration > Security.

The Edit Security Profile screen displays:

2. From the Network Authentication drop-down list, select the option that you want to use to

secure your network. NETGEAR recommends WPA2, but you can select any of the

following, depending on whether your client devices support WPA2:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

No comments

Netgear WN604 User's Guide Page 28