Netgear WN2500RPv2 Installation Guide download pdf (Page 9)

Connect with WPS

Wi-Fi Protected Setup (WPS) lets you easily join a secure WiFi

network without typing the network name and password.

WPS does not support WEP network security. If you are using WEP

security, follow the instructions in Connect with NETGEAR genie

Smart Setup on page 11.

1. Press the WPS button on the extender.

The WPS LED blinks.

2. Within two minutes, press the WPS button on your router or access

point.

The WPS LED and the 2.4 GHz Link Rate LED on your extender

light solid green, and the extender connects to your existing WiFi

network.

Note: If the 2.4 GHz Link Rate LED does not light, or the LED is

blinking amber, try again. If it still does not light, see Connect with

NETGEAR genie Smart Setup on page 11.

3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2

to connect the extender to the 5 GHz band.

4. Find the new extender network name.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Netgear WN2500RPv2 Installation Guide Page 9