Netgear WN2500RPv2 Installation Guide download pdf (Page 6)

LED Descriptions

Use the LEDs during installation to find the best location for the

extender or to monitor the extender performance.

Power LED • Solid Amber. The extender is booting.

• Solid Green. The extender is powered on.

• Blinking Green. The firmware is corrupt. Visit

http://support.netgear.com/.

• Blinking Amber. The firmware is upgrading or the

Restore Factory Settings button was pressed.

• Off. The extender is powered off.

2.4 GHz Link

Rate LED

This LED indicates a 2.4 GHz WiFi connection between the

extender and the router or access point.

• Solid Green. Best connection

• Solid Amber. Good connection

• Solid Red. Poor connection

• Off. No connection

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Netgear WN2500RPv2 Installation Guide Page 6