Netgear WGE111 User Manual download pdf (Page 39)

User Manual for the NETGEAR WGE111 Wireless Game Adapter

Web Configuration 4-9

To configure the WGE111 for Ad-Hoc access:

1. Set the Regulatory Domain, which is the country/domain. Select your region from the

drop-down list. This field displays the region of operation for which the wireless interface is

intended. It may not be legal to operate the router in a region other than the region shown here.

If your country or region is not listed, please check with your local government agency or

check our web site for more information on which channels to use.

Note: To ensure proper agency compliance and compatibility between similar products in your

area; the operating Channel/Frequency & Regulatory Domain must be set correctly.

2. Select the Data Rate — b only, or Auto to have the wireless game adapter automatically

determine the data rate to use.

3. Type a Service Set Identifier (SSID) for the network name in the SSID box.

4. The default Channel/Frequency is set to Auto. It should not be necessary to set the wireless

channel unless you notice interference problems with another nearby access point.

5. Select the Wireless Security option to match the Access Point; the screen will change

according to the option selected.

• Disable — no data encryption.

• WEP (Wired Equivalent Privacy) — use WEP 64 or 128 bit data encryption. See “Using

WEP Security Encryption” on page 4-7 for more information.

6. Click Apply.

Viewing the Wireless Networks Available

This Wireless Networks Available screen shows the wireless networks that the WGE111 Wireless

Game Adapter detects.

Figure 4-4: Wireless Networks Available

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 87 88

No comments

Netgear WGE111 User Manual Page 39