Netgear WGE111 User Manual download pdf (Page 36)

User Manual for the NETGEAR WGE111 Wireless Game Adapter

4-6 Web Configuration

Data Rate

Select the desired data rate. The options are:

• Auto — the data rate will be detected automatically (g or b).

• b only — operates in 802.11b mode only.

The data rate is set to Auto by default.

Network Name (SSID)

Choose a descriptive name for the WGE111 Wireless Game Adapter for identification purposes.

ANY is the factory default name for Infrastructure mode, which is a special name that will connect

with whatever access point or router’s signal is strongest. Enter a value of up to 32 alphanumeric

characters, or click the Select AP to choose an available Access Point. Spaces are not allowed, but

dashes (-) and underscore marks (_) are accepted.

The SSID must be the same as the Access Point you want to connect to. This value is also

case-sensitive. For example, NETGEAR is not the same as NETGEAr.

Wireless Security

Select the option to match the Access Point; the screen will change according to the option

selected:

• Disable — no data encryption.

• WEP (Wired Equivalent Privacy) — use WEP 64 or 128 bit data encryption. See the next

section, “Using WEP Security Encryption” on page 4-7 for detailed information.

• WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) — use WPA-PSK standard encryption.

See “Using WPA-PSK Security Encryption” on page 4-7 for detailed information.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 87 88

No comments

Netgear WGE111 User Manual Page 36