Netgear WGE111 User Manual download pdf (Page 23)

User Manual for the NETGEAR WGE111 Wireless Game Adapter

Basic Setup 3-7

Fixed IP

NETGEAR recommends you set up a fixed IP address for the WGE111 Wireless Game Adapter so

you can use a Web browser for configuration.

If you are using a NETGEAR router with the default settings, the following settings should work

for the Wireless Game Adapter:

• IP address: 192.168.0.202 (The first three sections of numbers — 192.168.0 in this example

— should match the first three sections of the IP address of your router. Make sure the last

three digits in the fourth section are unique on your network.)

• Subnet mask: 255.255.255.0

• Gateway IP address: 192.168.0.1 or 192.168.1.1 (the address of your router)

Understanding WEP Authentication and Encryption

Restricting wireless access to your network prevents intruders from connecting to your network.

However, the wireless data transmissions are still vulnerable to snooping. Using the WEP data

encryption settings described below will prevent a determined intruder from eavesdropping on

your wireless data communications. Also, if you are using the Internet for such activities as

purchases or banking, those Internet sites use another level of highly secure encryption called SSL.

You can tell if a Web site is using SSL because the Web address begins with HTTPS rather than

HTTP.

Authentication Scheme Selection

The WGE111 lets you select the following wireless authentication schemes.

• Automatic — the router detects the authentication scheme.

• Open System — allows any device to join the network, assuming that the device SSID

matches the access point SSID. Alternatively, the device can use the “ANY” SSID option to

associate with any available Access Point within range, regardless of its SSID.

•Shared Key — only those computers that possess the correct authentication key can join the

network.

Note: The authentication scheme is separate from the data encryption. You can

choose an authentication scheme which requires a shared key, but still leave the

data transmissions unencrypted. If you require strong security, use both the

Shared Key authentication scheme and WEP encryption settings.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 87 88

No comments

Netgear WGE111 User Manual Page 23