Netgear WG302 User Manual download pdf (Page 46)

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

3-24 Basic Installation and Configuration

July 2005 v3.0

• Shared Secret: This is shared between the Wireless Access Point and the Radius Server

while authenticating the supplicant.

• Re-authentication Time: The time interval in seconds after which the supplicant will be

authenticated again with the Radius Server. The default is 3600 seconds.

• Global-key Re-Key Time: Check on this option to enable Re-keying of Global Key. The

Global Key Re-Key can be done based on time interval in seconds or number of packets

exchanged using the global key. The default is 3600 seconds.

• Update if any station disassociates: Check on this option to refresh global key when any

stations disassociated with wireless Access Point.

• Accounting Radius Server Configuration: This configuration is required for accounting

using Radius Server. IP Address, Port No. and Shared Secret is required for

communication with Radius Server. A Secondary Radius Server can be configured which

is used on failure on Primary Radius Server.

• IP Address: The IP address of the Radius Server. The default is 0.0.0.0.

• Port Number: Port number of the Radius Server. The default is 1813.

• Shared Secret: This is shared between the Wireless Access Point and the Radius Server

while authenticating the supplicant.

4. Click Apply to save your settings.

5. Click WEP/WPA Settings in the Security menu.

Figure 3-13: Wireless Settings menu

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 127 128

No comments

Netgear WG302 User Manual Page 46