Netgear WNDR4500 User Manual download pdf (Page 92)

Advanced Settings

N900 Wireless Dual Band Gigabit Router WNDR4500

3. Click the Add Custom Service button to display the following screen:

4. In the Service Name field, enter a descriptive name.

5. In the Protocol list, select the protocol. If you are unsure, select TCP/UDP.

6. In the Starting Port field, enter the beginning port number.

• If the application uses a single port, enter the same port number in the Ending Port

field.

• If the application uses a range of ports, enter the ending port number of the range in

the Ending Port field.

7. In the Server IP Address field, enter the IP address of your local computer that will provide

this service.

8. Click Apply. The service appears in the list in the Port Forwarding/Port Triggering screen.

Editing or Deleting a Port Forwarding Entry

 To edit or delete a port forwarding entry:

1. In the table, select the radio button next to the service name.

2. Click Edit Service or Delete Service.

Application Example: Making a Local Web Server Public

If you host a web server on your local network, you can use port forwarding to allow web

requests from anyone on the Internet to reach your web server.

 To make a local web server public:

1. Assign your web server either a fixed IP address or a dynamic IP address using DHCP

address reservation. In this example, your router will always give your web server an IP

address of 192.168.1.33.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 125 126

No comments

Netgear WNDR4500 User Manual Page 92