Netgear MA701 User Manual Page 66

  • Download
  • Add to my manuals
  • Print
  • Page
    / 107
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 65
User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701
6-6 Notebook Configuration
M-10204-1
How to Configure an Ad-hoc Mode Profile
Note: Ad-hoc mode will not work using DHCP settings. Ad-hoc mode requires either static IP
addresses (such as
192.168.0.1). For instructions on setting up static IP addresses on a Windows
PC, refer to the PC Networking Tutorial included on the NETGEAR 802.11b Wireless Compact
Flash Card Resource CD (SW-10040-01).
Follow the instructions below to configure an Ad-hoc mode profile.
1. Run the MA701 Configuration Utility.
a. Make sure the MA701 software is installed and the MA701 is fully inserted in an available
PCMCIA or CardBus slot in your PC.
b. Open the configuration utility by clicking on the MA701 icon in the Windows
system tray.
Figure 6-5: Configuration tab page Ad-hoc mode selected
c. Click the Configuration tab to display the view shown above.
d. Select Ad-hoc from the Network mode drop-down list.
e. Click Apply to apply your settings
2. Save your settings in a Profile.
a. Click the Profiles tab to view the screen below.
Page view 65
1 ... 65 66 67 ... 107

Comments to this Manuals

No comments