Netgear MA701 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 107
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701
Basic Setup for a PDA 3-11
M-10204-1
The PDA does
not get an IP
Address.
The IP Address
has not taken
effect yet.
Remove and reinsert the MA701 Wireless CF Card or
turn off and then turn on the PDA.
Mismatched
network settings,
such as SSID and
WEP encryption.
Check and re-enter the same SSID and WEP settings
as Access Point.
The PDA does
not recognize
the MA701.
The MA701
Software may not
be installed
properly.
Remove and then reinstall the MA701 Wireless CF
Card’s Driver/Utility software.
The PDA may
need to be reset.
Reset the PDA.
The battery power
may be too low.
Recharge the battery.
The MA701
cannot connect
to a known
Access Point
within range.
The SSID may be
incorrect.
Check and enter the correct SSID.
Mismatched WEP
settings.
Check and make sure you have configured the same
WEP settings as the Access Point
Incorrect Network
Mode.
Check to see if the MA701 Wireless CF Card is
configured in Infrastructure mode.
The PDA cannot
browse the web
even when the
MA701 is
associated with
an Access Point
correctly.
Incorrect setting
on PDA.
Under the Connections Settings in Windows, make
sure that you have selected the Internet option for the
“My network card connects to:” field.
The IP address
may not be
correct.
Change to a known valid IP address or reset the PDA.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 106 107

Comments to this Manuals

No comments