Netgear DGN3500 User Manual download pdf (Page 22)

RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual

2-3 Configuring Your Wireless Network and Security Settings

v1.0, November 2009

Wireless Security Options

Indoors, computers can connect over 802.11g wireless networks at a maximum range of up to

300 feet. Such distances can allow for others outside your immediate area to access your network.

Unlike wired network data, your wireless data transmissions can extend beyond your walls and

can be received by anyone with a compatible adapter. For this reason, use the security features of

your wireless equipment. The modem router provides highly effective security features, which are

covered in detail in this chapter. Deploy the security features appropriate to your needs.

There are several ways you can enhance the security of your wireless network:

• Restrict access based on MAC address. You can allow only trusted PCs to connect so that

unknown PCs cannot wirelessly connect to the modem router. Restricting access by MAC

address adds an obstacle against unwanted access to your network, but the data broadcast over

the wireless link is fully exposed (see “Restricting access by MAC address” on page 2-8).

• Turn off the broadcast of the wireless network name SSID. If you disable broadcast of the

SSID, only devices that have the correct SSID can connect. This nullifies wireless network

discovery feature of some products, such as Windows XP, but the data is still exposed (see

“Hiding your wireless network name (SSID)” on page 2-8).

• WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP Shared

Key authentication and WEP data encryption block all but the most determined eavesdropper.

This data encryption mode has been superseded by WPA-PSK and WPA2-PSK (see

“Configuring WEP” on page 2-11).

• WPA-802.1x. Wi-Fi Protected Access (WPA) with user authentication implemented using

IEE 802.1x and RADIUS servers (see “Configuring WPA-802.1x” on page 2-12).

• WPA-PSK (TKIP) + WPA2-PSK (AES). Wi-Fi Protected Access (WPA) using a pre-shared

key to perform authentication and generate the initial data encryption keys. The very strong

authentication along with dynamic per frame re-keying of WPA makes it virtually impossible

to compromise (see “Configuring Mixed WPA-PSK+WPA2-PSK Security” on page 2-10).

For more information about wireless technology, see the link to the online document in “Virtual

Private Networking Basics” in Appendix B.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 118 119

No comments

Netgear DGN3500 User Manual Page 22