Netgear 7200 Series Layer 2 Managed Switch Software User Manual download pdf (Page 91)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

Switching Commands 7-49

202-10010-01

config spanningtree bridge maxage

This command sets the Bridge Max Age parameter to a new value for the common and internal

spanning tree. The maxage <value> is in whole seconds within a range of 6 to 40, with the value

being less than or equal to "2 times (Bridge Forward Delay - 1)".

Default 20

Format config spanningtree bridge maxage <6-40>

config spanningtree bridge hellotime

This command sets the Hello Time parameter to a new value for the common and internal

spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value

being less than or equal to "(Bridge Max Age / 2) - 1".

Default 2

Format config spanningtree bridge hellotime <1-10>

config spanningtree bridge forwarddelay

This command sets the Bridge Forward Delay parameter to a new value for the common and

internal spanning tree. The forwarddelay <value> is in whole seconds within a range of 4 to 30,

with the value being greater than or equal to "(Bridge Max Age / 2) + 1".

Default 15

Format config spanningtree bridge forwarddelay <4-30>

config spanningtree bridge priority

This command sets the Bridge Priority parameter to a new value for the common and internal

spanning tree. The bridge priority <value> is a number within a range of 0 to 61440. The twelve

least significant bits will be masked according to the 802.1s specification. This will cause the

priority to be rounded down to the next lower valid priority.

Default 32768

Format config spanningtree bridge priority <0-61440>

show spanningtree cst detailed

This command displays spanning tree settings for the common and internal spanning tree.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 157 158

No comments

Netgear 7200 Series Layer 2 Managed Switch Software User Manual Page 91