Netgear 7200 Series Layer 2 Managed Switch Software User Manual download pdf (Page 109)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

Switching Commands 7-67

202-10010-01

config dot1x port transmitperiod

This command sets the value, in seconds, of the timer used by the authenticator state machine on

the specified port to determine when to send an EAPOL EAP Request/Identity frame to the

supplicant. The transmit period must be a value in the range of 1 and 65535.

Default 30

Format config dot1x port transmitperiod <slot.port> <1-

65535>

config dot1x port supptimeout

This command sets the value, in seconds, of the timer used by the authenticator state machine on

this port to timeout the supplicant. The supplicant timeout must be a value in the range of 1 and

65535.

Default 30

Format config dot1x port supptimeout<slot.port> <1-65535>

config dot1x port servertimeout

This command sets the value, in seconds, of the timer used by the authenticator on this port to

timeout the authentication server. The server timeout must be a value in the range of 1 and 65535.

Default 30

Format config dot1x port servertimeout <slot.port> <1-65535>

config dot1x port maxrequests

This command sets the maximum number of times the authenticator state machine on this port will

retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The max requests

value must be in the range of 1 and 10.

Default 2

Format config dot1x port maxrequests <slot.port> <1-10>

config dot1x port reauthperiod

This command sets the value, in seconds, of the timer used by the authenticator state machine on

this port to determine when reauthentication of the supplicant takes place. The reauthperiod must

be a value in the range of 1 and 65535.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 157 158

No comments

Netgear 7200 Series Layer 2 Managed Switch Software User Manual Page 109