Netgear 54 Mbps Wireless ADSL Firewall DG834G User Manual Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
Wireless ADSL2+ Modem Router DG834G User Manual
5-16 Advanced Configuration
v1.0, May 2008
1. Configure the operating mode of the modem routers.
Because it is in a central location, configure the DG834G v5 modem router (AP 1) on
LAN Segment 1 in Point-to-Multi-Point Bridge mode and enter the MAC addresses of AP
2 and AP 3 in the Remote MAC Address 1 and Remote MAC Address 2 fields.
Configure the access point (AP2) on LAN Segment 2 in Point-to-Point Bridge mode with
the remote MAC address of the DG834G v5 modem router.
Configure the access point (AP3) on LAN Segment 3 in Point-to-Point Bridge mode with
the remote MAC address of the DG834G v5 modem router.
2. Disable the DHCP server on AP2 and AP3. AP1 will then be the DHCP server.
3. Verify the following for all access points:
The LAN network configuration of the modem router and other access points are
configured to operate in the same LAN network address range as the LAN devices.
Only one AP, the DG834G v5 modem router in Figure 5-9, is configured in Point-to-
Multi-Point Bridge mode; all the others are in Point-to-Point Bridge mode.
All APs, including the DG834G v5 modem router, must be on the same LAN. That is, all
the AP LAN IP addresses must be in the same network.
All APs, including the DG834G v5 modem router, must use the same SSID, channel,
authentication mode, if any, and encryption in use.
All point-to-point APs must have the MAC address of AP 1 (the DG834G v5 modem
router in the above diagram) in the Remote AP MAC address field.
4. Verify connectivity across the LANs.
A computer on any LAN segment should be able to connect to the Internet or share files
and printers with any other PCs or servers connected to any of the three LAN segments.
Note: Wireless stations configured as they are in Figure 5-9 will not be able to connect to
the modem router or access points. If you require wireless stations to access any
LAN segment, you can use additional access points configured in Wireless Access
Point mode in any LAN segment.
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 175 176

Comments to this Manuals

No comments