Netgear 54 Mbps Wireless ADSL Firewall DG834G User Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
Wireless ADSL2+ Modem Router DG834G User Manual
Configuring Your Wireless Network and Security Settings 2-15
v1.0, May 2008
The settings that you configured in Step 2 are broadcast to the WPS devices so that they can
connect to the modem router.
5. To view a list of all devices connected to your modem router (including wireless and Ethernet-
connected), see “Viewing Attached Devices” on page 4-8.
Advanced Wireless Settings for WPS and WDS
The Advanced Wireless Settings screen includes settings for Push 'N' Connect (WPS) and for
Wireless Distribution System (WDS) setup. From the main menu, select Advanced Wireless
Settings to display the following screen:
WPS (Push 'N' Connect). The WPS settings show the modem router PIN, and the Keep
Existing Wireless Settings check box.
By default, the Keep Existing Wireless Settings check box is cleared. This allows the modem
router to automatically generate the SSID and WPA/WPA2 security settings when it
implements WPS. After WPS is implemented, the modem router automatically selects this
check box so that your SSID and wireless security settings remain the same if other WPS-
enabled devices are added later.
If you configure your wireless router settings and security manually, the Keep Existing
Wireless Settings radio box will also be enabled. This will allow you to use WPS (Push 'N'
Connect) to connect additional WPS capable devices to your wireless network using the
existing settings.
Note: To make sure that your new wireless settings remain in effect, verify that the
Keep Existing Wireless Settings checkbox is selected in the WPS Settings
screen.
Figure 2-7
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 175 176

Comments to this Manuals

No comments