Netgear 54 Mbps Wireless ADSL Firewall DG834G User Manual Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
Wireless ADSL2+ Modem Router DG834G User Manual
Virtual Private Networking 6-43
v1.0, May 2008
The following table explains the fields in the VPN Manual Policy screen.
Table 6-7. VPN Manual Policy Fields and Settings
Fields and Settings Description
General
The DG834Gv5 VPN
tunnel network
connection fields.
Policy Name Enter a unique name to identify this policy. This name is not
supplied to the remote VPN endpoint. It is used only to help
you manage the policies.
Remote VPN
Endpoint
The remote VPN endpoint must have this VPN gateway's
address entered as its remote VPN endpoint.
If the remote endpoint has a dynamic IP address, select
Dynamic IP address. No address data input is required.
You can set up multiple remote dynamic IP policies, but only
one such policy can be enabled at a time. Otherwise, select
an option (IP address or domain name) and enter the
address of the remote VPN endpoint to which you want to
connect.
Local LAN
The remote VPN
endpoint must have
these IP addresses
entered as its remote
addresses.
Subnet Mask Enter the network mask.
Single PC - no
Subnet
Select this option if there is no LAN (only a single PC) at the
remote endpoint. If this option is selected, no additional data is
required.
Single/Start IP
Address
Enter the IP address for a single address, or the starting
address for an address range. A single address setting is
used when you want to make a single server on your LAN
available to remote users. A range must be an address
range used on your LAN.
Any. The remote VPN endpoint may be at any IP address.
Finish IP
Address
For an address range, enter the finish IP address. This must
be an address range used on your LAN.
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 175 176

Comments to this Manuals

No comments