Netgear FS526T User Manual download pdf (Page 24)

Smart Switch Series Software Manual

4-10 Web-Based Management Interface

July 2005

Switch> Trunking Page

Port Trunking is a feature that allows multiple links between switches to work as one virtual link

(aggregate link). Trunks can be defined for similar port types only. For example, a 10/100 port

cannot form a Port Trunk with a gigabit port. For 10/100 ports, trunks can only be formed within

the same bank. A bank is a set of eight ports, such as ports 1 to 8, ports 9 to 16, ports 17 to 24, or

port 25 and port 26, on the same switch unit. Up to four trunks can be operating at the same time.

The Trunk Table shows all four trunking groups are set disabled by default. For each trunk group,

trunk members are pre-set for selection.

To select Trunk members for a Trunk group, click Apply to activate the new setting

Note: The selected trunk port setting must set to the same VLAN group.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

No comments

Netgear FS526T User Manual Page 24