Netgear FS526T User Manual download pdf (Page 22)

Smart Switch Series Software Manual

4-8 Web-Based Management Interface

July 2005

Switch> VLAN> IEEE802.1Q Tag VLAN

Depending on your model switch there are up to 64 static Tag VLAN groups supported on your

switch. The VLAN tagging option is a standard set by the IEEE to facilitate the spanning of

VLANs across multiple switches (Reference: Appendix A and IEEE Std 802.1Q-1998 Virtual

Bridged Local Area Networks).

Click to select IEEE802.1Q VLAN. A screen pops up to confirm this change.

All ports are set belonging to VLAN 1 by default, all untagged.

From the page, you can create a new VLAN, add new ports to an existing VLAN, remove ports

from an existing VLAN or, delete a VLAN.

Add a port to a VLAN Group

• Under the VLAN ID drop down menu, select the VLAN you want to edit.

• Click the box below the port number so that a ‘T’ (tagged) or ‘U’ (untagged) appears.

• Click Apply.

Remove a port from a VLAN Group

• Click the box again until a blank box appears. This will remove VLAN membership from the

port.

• Click Apply.

Note: The default PVID of all ports is 1; therefore, you cannot remove any ports for the default

Tag VLAN. It means that before removing any desired port from default Tag VLAN, changes

PVID of such desired port to the PVID other than 1.

Create a new VLAN Group

• Under the VLAN ID drop down menu, select Add new VLAN.

• Enter the VLAN ID “2” in the provided fields. VLAN ID must be set within 2 ~ 4094.

• Add VLAN members if so desired; click the box below the port number so that a ‘T’ (tagged)

or ‘U’ (untagged) appears.

• Click Apply.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 49 50

No comments

Netgear FS526T User Manual Page 22