Netgear WN1000RP User's Guide download pdf (Page 18)

Network Settings

WiFi Booster for Mobile WN1000RP

• WEP 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0–9, a–f,

or A–F).

4. Enter the encryption keys. You can manually or automatically program the four data

encryption keys. These values must be identical on all computers and access points in your

network.

• Passphrase. To use a passphrase to generate the keys, enter a passphrase, and

click Generate to create the keys to access the booster network.

Note: Not all wireless computers support passphrase key generation. If

your computer does not support the passphrase, you need to type

the encryption key in order to join the wireless network.

• Key 1–Key 4. These values are not case-sensitive. You can manually enter the four

data encryption keys. These values must be identical on all computers and access

points in your network. Enter 10 hexadecimal digits (any combination of 0

–9, a–f, or

–F).

5. Select which of the four keys will be the default.

Data transmissions are always encrypted using the default key. The other keys can only

be used to decrypt received data. The four entries are disabled if WPA-PSK or WPA

authentication is selected.

6. Click Apply to save your settings.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

No comments

Netgear WN1000RP User's Guide Page 18