Netgear WN1000RP User's Guide download pdf (Page 9)

Getting Started

WiFi Booster for Mobile WN1000RP

2 As you move the booster, check the LEDs until you find a location where the Link Rate LED

is green or amber, and the PC to Booster LED

is green.

3 Y

ou might have to unplug the booster as you move it to a different location. If you do, from

the new location, power up the booster and continue to check the LEDs.

Once the LEDs show that the booster is in a good location, open a browser and go to

ttp://www.mywifiext.net to continue the setup process.

Performance

The Link Rate LEDs indicate the performance of the 2.4 GHz wireless connection from the booster

to a router.

• The best performance is delivered when the Link Rate LED is green.

• A workable perfo

rmance is delivered when the Link Rate LED is amber.

• A re

d Link Rate LED indicates a poor connection or no connection between the booster

and the router.

• Make sure

that your PC to Booster LED is green before you check the Link Rate

LED for performance.

 To improve booster performance:

1 Move the bo

oster closer to the router or to a different location with a better line of sight.

2 As

you move the booster, check the Link Rate and the PC to Booster LEDs on the booster

until you find a good location. These LEDs should remain solid green.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 34 35

No comments

Netgear WN1000RP User's Guide Page 9