Netgear WG602V4 User Manual download pdf (Page 30)

NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual

2-10 Installation and Configuration

v1.0, June 2007

3. When prompted enter the default User Name admin and default Password password into the

Once you have entered your User Name and Password, your Web browser should

automatically find the Wireless AP and display the home page, as shown in Figure 2-3 on page

2-4.

NetBIOS Name Login

The NETGEAR WG602v4 54 Mbps Wireless Access Point can be configured remotely from

Microsoft Internet Explorer browser version 5.0 or above, or Netscape Navigator Web browser

version 4.78 or above or Mozilla Firefox. You can connect to the WG602v4 by using its default

NetBIOS name or its default IP address.

To connect using the default IP address:

1. Enter the NetBIOS name of your access point. The default NetBIOS name is

NETGEARxxxxxx where xxxxxx is the last 6 digits of the WG602v4’s MAC address (for

example, NETGEAR123456, with no spaces or delimiters.). To locate the NetBIOS name of

your WG602v4, see the bottom label.

2. Open a Web browser.

Figure 2-7

Note: If the computer you are using to connect to the WG602v4 is on a different

subnet, you will not be able to connect via its NetBIOS name unless there is a

WINS server on your LAN. If the NetBIOS name login fails, use the procedure

for “IP Address Login” on page 2-9

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

No comments

Netgear WG602V4 User Manual Page 30