Netgear MR814v2 User Manual Page 78
- Page / 142
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Reference Manual for the MR814v2 Cable/DSL Wireless Router
6-14 Advanced Configuration of the Router
Using Universal Plug and Play (UPnP)
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
Figure 6-6. UPnP Menu
From the Main Menu of the browser interface, under Advanced, click on UPnP. Set up UPnP
according to the guidelines below.
Turn UPnP On: UPnP can be enabled or disabled for automatic device configuration. The default
setting for UPnP is enabled. If disabled, the router will not allow any device to automatically
control the resources, such as port forwarding (mapping), of the router.
Advertisement Period: The Advertisement Period is how often the router will broadcast its UPnP
information. This value can range from 1 to 1440 minutes. The default period is 30 minutes.
Shorter durations will ensure that control points have current device status at the expense of
additional network traffic. Longer durations may compromise the freshness of the device status but
can significantly reduce network traffic.
- Reference Manual for the 1
- MR814v2 Cable/DSL 1
- Wireless Router 1
- Trademarks 2
- Statement of Conditions 2
- Contents 5
- Preface 11
- About This Manual 11
- Special Message Formats 12
- Chapter 1 13
- Introduction 13
- 1-2 Introduction 14
- Security 15
- Extensive Protocol Support 15
- Maintenance and Support 16
- Package Contents 17
- The Router’s Front Panel 18
- The Router’s Rear Panel 19
- 1-8 Introduction 20
- Chapter 2 21
- Cable or DSL modem 24
- Cable or 25
- DSL modem 25
- PPPoE Wizard-Detected Option 28
- Chapter 7, “Troubleshooting.” 32
- ISP Does Not Require Login 33
- ISP Does Require Login 33
- Chapter 3 37
- Wireless Configuration 37
- Wireless Data 38
- Security Options 38
- Range: Up to 500 Feet 38
- Wireless Configuration 3-3 39
- Wireless Configuration 3-5 41
- 3-6 Wireless Configuration 42
- Wireless Configuration 3-7 43
- Configure WEP 46
- 3-12 Wireless Configuration 48
- Chapter 4 49
- Content Filtering 49
- 4-2 Content Filtering 50
- Figure 4-1: Block Sites menu 50
- Content Filtering 4-3 51
- 4-4 Content Filtering 52
- Content Filtering 4-5 53
- Figure 4-4: Schedule menu 53
- 4-6 Content Filtering 54
- Figure 4-5: Logs menu 54
- Content Filtering 4-7 55
- Figure 4-6: Email menu 55
- Table 4-2. Log action buttons 55
- 4-8 Content Filtering 56
- Chapter 5 57
- Maintenance 57
- 5-2 Maintenance 58
- Maintenance 5-3 59
- 5-4 Maintenance 60
- Upgrading the Router Software 61
- Configuration File Management 62
- Maintenance 5-7 63
- Erasing the Configuration 64
- Chapter 6 65
- Adding a Custom Service 66
- Setting the MTU Size 69
- Using Address Reservation 72
- Using a Dynamic DNS Service 73
- Configuring Static Routes 74
- Figure 6-6. UPnP Menu 78
- Chapter 7 81
- Troubleshooting 81
- LEDs Never Turn Off 82
- LAN or WAN Port LEDs Not On 82
- Troubleshooting 7-3 83
- 7-6 Troubleshooting 86
- Problems with Date and Time 87
- 7-8 Troubleshooting 88
- Appendix A 89
- Technical Specifications 89
- A-2 Technical Specifications 90
- Interface Specifications 90
- Appendix B 91
- IP Addresses and the Internet 92
- 192.0.1.x to 223.255.254.x 94
- Subnet Addressing 95
- Table 7-2. Netmask Formats 96
- Private IP Addresses 97
- Related Documents 99
- IP Configuration by DHCP 100
- What is a Firewall? 101
- Ethernet Cabling 102
- Cable Quality 103
- Appendix C 105
- Preparing Your Network 105
- C-2 Preparing Your Network 106
- Windows 95B, 98, and Me 108
- Preparing Your Network C-5 109
- Verifying TCP/IP Properties 110
- Preparing Your Network C-7 111
- C-8 Preparing Your Network 112
- Preparing Your Network C-9 113
- C-10 Preparing Your Network 114
- Preparing Your Network C-11 115
- C-12 Preparing Your Network 116
- Preparing Your Network C-13 117
- Properties button 118
- 3. Type ipconfig /all 119
- MacOS 8.6 or 9.x 120
- 4. Click Save 121
- Are Login Protocols Used? 122
- 4. Select the IP Address tab 123
- 5. Select the Gateway tab 123
- Computers 124
- Restarting the Network 125
- C-22 Preparing Your Network 126
- Appendix D 127
- Wireless Networking Basics 127
- Authentication and WEP 129
- Open System Authentication 130
- Shared Key Authentication 130
- Overview of WEP Parameters 131
- Key Size 132
- Wireless Channels 133
- Glossary 135
- 2 Glossary 136
- 4 Glossary 138
Related products and manuals for WLAN access points Netgear MR814v2
WLAN access points Netgear WG102 User Manual
(118 pages)
(118 pages)
WLAN access points Netgear HA501 User Manual
(23 pages)
(23 pages)
(2 pages)
WLAN access points Netgear DG834GT User Manual
(176 pages)
(176 pages)
WLAN access points Netgear WGR614 User Manual
(154 pages)
(154 pages)
WLAN access points Netgear WNDAP350 User's Guide
(138 pages)
(138 pages)
WLAN access points Netgear WNDAP360 User Manual
(137 pages)
(137 pages)
WLAN access points Netgear DG834G User Manual
(166 pages)
(166 pages)
© 2020, manymanuals.com. All rights reserved. | 1.235 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals