Netgear ME101 User's Guide download pdf (Page 15)

Configuring the bridge settings:

1. Type http:// and the IP address of

the bridge as the web address in the

browser and press Return. (The

default is 192.168.0.200.)

You’ll see the Information page.

2. To select a Wireless Network Name

(SSID) for the bridge to connect

to, click Wireless Settings.

3. Type admin as the User ID and

type password as the Password.

4. Click OK.

5. Type the Wireless Network Name

(SSID) of the wireless router or

access point.

6. If you’re not in the United States, select the correct country or region from the

Country/Region list. Click Yes to accept the new country or region.

Warning: Having the bridge set to the wrong country or region may result in the violation

of local laws.

7. Click Apply and if you’re through making changes, click Logout.

8. To use the bridge with one or more different Ethernet-enabled devices, see Installing the

ME101 on page 4.

Changing the password:

1. Start your browser software.

2. Type http:// followed by the IP

address for the bridge as the web

address and press Return. (The

default is 192.168.0.200.)

You’ll see the Information page.

3. To change the password, click

Change Password.

4. Type admin as the User ID and

type the current password as the

Password. (password is the

default.)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 24 25

No comments

Netgear ME101 User's Guide Page 15