Netgear ME101 User's Guide download pdf (Page 11)

Configuring the Bridge for Your Wireless Network

Once you are logged into the Configuration Utility, you can view the status of your home

wireless network and current configuration of the bridge, change the password, enable WEP

security (if you have it set up on your wireless network), select a specific network for the

wireless connection, or make other configuration changes.

1. Choose Programs>NETGEAR ME101 Bridge>ME101 Configuration Utility from the

Start menu.

2. If the bridge’s name doesn’t appear in the Bridge Name list, select Browse to have the

utility search for an active bridge.

3. Type password as the password.

4. Click Login.

5. Click the

Configuration tab.

6. Either select a name assigned to the wireless router or

access point from the Network Name (SSID) list or

type the name.

Note: If you have NETGEAR wireless devices, the

default SSID is Wireless or NETGEAR.

7. If you are not in the United States, select the correct

country or region from the Country/Region list. Click

Yes to accept the new country or region.

Warning: Having the bridge set to the wrong country

or region may result in the violation of local laws.

8. If you have a router that assigns IP addresses

dynamically (DHCP) select Obtain an IP Address

Automatically. Otherwise, if your network uses static addresses, select Use the Following

IP Address and type an IP address for the bridge. The first three sets of numbers

(xxx.xxx.xxx.yyy) should be the same as your access point or router. The last set of

numbers (.yyy) should be a unique set of numbers on your network. For example, if the

router uses 192.168.1.1, then 192.168.1.25 is a possible IP address for the bridge.

Note: If you have more than one ME101 on the network, only one can use the default

address of 192.168.0.200.

9. Click Apply and, if you are through making changes, click Exit.

10. To use the bridge with different computer(s) or other Ethernet-enabled device(s), return to

Installing the ME101 on page 4 to connect the bridge.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Netgear ME101 User's Guide Page 11