Netgear WPN824EXT- User Manual download pdf (Page 25)

RangeMax WiFi Range Extender WPN824EXT User Manual

Implementing Appropriate Wireless Security 2-3

v1.0, April 2008

• Manual method. These values are not case-sensitive. For 64-bit WEP, enter 10 hex

digits (any combination of 0–9 or a–f). For 128-bit WEP, enter 26 hex digits.

Key 1: ___________________________________

Key 2: ___________________________________

Key 3: ___________________________________

Key 4: ___________________________________

• If WPA-PSK authentication is used.

– Passphrase. ______________________________

These characters are case-sensitive.

Enter a word or group of printable characters. When you use WPA-PSK, the other devices

in the network will not connect unless they are set to WPA-PSK as well and are configured

with the correct passphrase.

Use the procedures described in this chapter to configure the WiFi range extender. Store this

information in a safe place.

Setting Up and Testing Basic Wireless Connectivity

Follow these instructions to set up and test basic wireless connectivity. Once you have established

basic wireless connectivity, you can enable security settings appropriate to your needs.

1. Log in to the WiFi range extender (see “Logging In” on page 1-5).

Note: If you use a wireless computer to configure WPA settings, you will be disconnected

when you click Apply. Reconfigure your wireless adapter to match the new settings

or access the WiFi range extender from a wired computer to make any further

changes.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

No comments

Netgear WPN824EXT- User Manual Page 25