Netgear WPN824EXT- User Manual download pdf (Page 41)

RangeMax WiFi Range Extender WPN824EXT User Manual

Setup and Maintenance 3-9

v1.0, April 2008

• Erase. Sometimes you might want to restore the extender to original default settings. You can

do so by using the Erase function, which restores all factory settings. After an erase, the

extender’s user name is admin, the password is password, the LAN IP address is

192.168.1.250, and the extender's DHCP server is enabled.

To erase the configuration, click the Erase button.

Set Password

The Set Password screen allows you to change the default password for the WiFi range extender,

password, to a more secure password. (For more information about logging in and the default

settings, see “Logging In” on page 1-5 and “Restoring the Default User Name and Password” on

page A-4.)

Select Set Password under Maintenance in the main menu. The Set Password screen displays.

Note: To restore the factory default configuration settings when you do not know the

on the rear panel of the extender. See “Restoring the Default User Name and

Password” on page A-4

Figure 3-7

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 63 64

No comments

Netgear WPN824EXT- User Manual Page 41