Netgear WNDA3100v2 User's Guide Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
2-16
v1.0, June 2009
b. Click Apply, and then click Close to exit the Smart Wizard.
Setting Up WEP Encryption Security
Follow the steps below to configure WEP encryption security:
1. Run the WNDA3100v2 Smart Wizard.
a. Make sure that the WNDA3100v2 software is installed and the wireless-N USB adapter is
connected to the USB port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab displays.
2. Configure the Security settings.
a. In the Profile field, select the profile or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
c. In the Security section, select WEP.
3. Select the WEP encryption strength you will use.
64-bit WEP data encryption
128-bit WEP data encryption
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
Figure 2-14
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Comments to this Manuals

No comments