Netgear WNDA3100v2 User's Guide download pdf (Page 39)

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual

2-13

v1.0, June 2009

3. Click Initiate Ad Hoc. The Ad Hoc Setting screen displays:

4. In the Start Ad Hoc drop-down list, select either 2.4GHz (802.11 b/g), or 5 GHz (802.11a) for

your Ad Hoc computer-to-computer network.

5. In the Channel drop-down list, Automatic should work. If you notice interference problems

with another nearby wireless device, select a channel that is not being used by other nearby

wireless networks. Use the Networks tab to view the channels in use in your area.

6. Click OK.

About Wireless Security

Many networks use wireless security to encrypt wireless data communications. To connect to a

network with wireless security, you must set up the adapter with exactly the same wireless security

settings. If you use the Smart Wizard to set up security, you can take advantage of Push 'N'

Connect (WPS) to set up WPA-PSK [TKIP] security (see “Using Push 'N' Connect (WPS) to

Connect to a Wireless Network” on page 2-3). Otherwise, you can manually set one of the

following types of wireless security used for home networks:

• WPA-PSK [TKIP] or WPA2-PSK [AES]. See “Setting Up WPA-PSK [TKIP] or WPA2-

PSK [AES] Security” on page 2-15.

• WEP. See “Setting Up WEP Encryption Security” on page 2-16.

For more information about wireless security, see the link to “Wireless Communications:” in

Appendix B. In addition to wireless security, you should configure appropriate LAN network

security such as requiring a user name and password to access shared resources in your network.

Figure 2-12

Note: The channel number differs depending on the country. The connection speed

automatically defaults to the highest speed.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

No comments

Netgear WNDA3100v2 User's Guide Page 39