Netgear WNCE4004 User's Guide download pdf (Page 15)

Chapter 2. Advanced Settings | 15

Wireless HD Video and Gaming Adapter WNCE4004

To join a network using WPS after installation:

1. From the Internet adapter menu at http://www

.mywifiext.net, under Setup, select WPS.

The following screen displays:

2. Select Push and Connect (recommended)

Either click the

button or press the WPS button on the rear panel of the Internet

adapter.

The Internet adapter tries to join the wireless network for 2 minutes if you are using Push

'N' Connect.

3. Press the WPS button on the router.

4. Go back to the computer that is connected to the Internet adapter, and make sure that you

are connected to the wireless network.

• When WPS is running, the LED blinks, alternating between green and amber

• If the computer does not connect with WPS, the LED alternately blinks red and green

for 5 seconds.

• If the computer connects using WPS, the LED switches to show the link quality: solid

green, solid amber

, or solid red.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Netgear WNCE4004 User's Guide Page 15