Netgear RP114 Datasheet download pdf (Page 27)

Reference Guide for the Model RP114 Web Safe Router

Setting Up the Hardware 2-3

The Router’s Front Panel

The front panel of the Model RP114 Web Safe Router (Figure 2-1) contains port connections and

status LEDs.

Figure 2-1. RP114 Front Panel

You can use some of the LEDs to verify connections. Table 2-1 lists and describes each LED on

the front panel of the router. These LEDs are green when lit.

Table 2-1. LED Descriptions

Label Activity Description

PWR (Power) On

Off

Power is supplied to the router.

Power is not supplied to the router.

TEST On

Off

Blinking

The system is not ready or has failed to start up.

The system is ready and running.

The system is initializing.

WAN

LNK On The WAN port has detected a link with an attached device.

ACT (Activity) Blinking Data is being transmitted or received by the WAN port.

LAN

LNK/ACT

(Link/Activity)

Blinking

The LAN port has detected a link with an attached device.

Data is being tranmitted or received by the LAN port.

100 (100 Mbps) On

Off

The LAN is operating at 100 Mbps.

The LAN is operating at 10 Mbps.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 153 154

No comments

Netgear RP114 Datasheet Page 27