Netgear N150 Wireless Router WNR1000 User Manual Page 38
- Page / 122
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
N150 Wireless Router WNR1000 User Manual
2-12 Safeguarding Your Network
v1.0, January 2009
• Enable WMM. Clear this check box to disable WMM. WMM (Wireless Multimedia), a
subset of the 802.11e standard, allows wireless traffic to have a range of priorities,
depending on the kind of data. Time-dependent information, like video or audio, will have
a higher priority than normal traffic. For WMM to function correctly, Wireless clients
must also support WMM.
• Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode. The
Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode options are reserved
for wireless testing and advanced configuration only. Do not change these settings.
• WPS Settings. For information about these settings, see the section, “Using Push 'N'
Connect (Wi-Fi Protected Setup)” on page 2-12.
• Wireless Card Access List. For information about this list, see “Restricting Wireless
Access by MAC Address” on page 2-18.
.
Using Push 'N' Connect (Wi-Fi Protected Setup)
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure
the router’s network name (SSID) and security settings and, at the same time, connect a wireless
client securely and easily to the router. Look for the symbol on your client device. WPS
automatically configures the network name (SSID) and wireless security settings for the router (if
the router is in its default state) and broadcasts these settings to the wireless client.
When you add wireless clients, whether or not they are WPS enabled, the added devices must
share the same network name (SSID) and security passphrase. For more information, see
“Connecting Additional Wireless Client Devices after WPS Setup” on page 2-17.
The N150 Wireless Router provides two methods for connecting to a wireless client that supports
WPS, described in the following sections:
Note: NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi Protected Setup
(WPS) standard (for more information, see http://www.wi-fi.org). All other Wi-Fi-
certified and WPS-capable products should be compatible with NETGEAR
products that implement Push 'N' Connect.
Note: If you choose to use WPS, the only security methods supported are WPA-PSK and
WPA2-PSK. WEP security is not supported by WPS.
- N150 Wireless Router 1
- WNR1000 User Manual 1
- FOR HOME OR OFFICE USE 6
- Contents 7
- About This Manual 11
- How to Use This Manual 12
- How to Print This Manual 12
- Revision History 13
- Chapter 1 15
- Figure 1-1 16
- Figure 1-2 17
- Figure 1-3 17
- Figure 1-4 18
- Figure 1-5 20
- Figure 1-6 22
- Figure 1-7 23
- Figure 1-8 23
- Figure 1-9 24
- Figure 1-10 26
- Chapter 2 27
- Safeguarding Your Network 27
- Safeguarding Your Network 2-3 29
- 2-4 Safeguarding Your Network 30
- Safeguarding Your Network 2-5 31
- 2-6 Safeguarding Your Network 32
- Figure 2-2 32
- Safeguarding Your Network 2-7 33
- 2-8 Safeguarding Your Network 34
- Safeguarding Your Network 2-9 35
- Figure 2-3 35
- Figure 2-4 36
- Figure 2-5 37
- Push Button Configuration 39
- Security PIN Entry 40
- Figure 2-8 41
- Figure 2-9 41
- Configuring the WPS Settings 42
- Figure 2-11 44
- Figure 2-12 45
- Figure 2-13 46
- Backing Up Your Configuration 47
- Understanding Your Firewall 47
- Chapter 3 49
- Figure 3-1 50
- Figure 3-2 51
- Figure 3-3 52
- Scheduling Blocking 53
- Field Description 54
- Figure 3-6 55
- Setting the Time Zone 56
- Chapter 4 57
- Configuring a Device Name 58
- Using Address Reservation 60
- Using a Dynamic DNS Service 61
- Disabling the SPI Firewall 62
- Configuring Static Routes 64
- Figure 4-5 65
- Figure 4-6 66
- Chapter 5 67
- Fine-Tuning Your Network 67
- 5-2 Fine-Tuning Your Network 68
- Fine-Tuning Your Network 5-3 69
- 5-4 Fine-Tuning Your Network 70
- Fine-Tuning Your Network 5-5 71
- 5-6 Fine-Tuning Your Network 72
- Adding a Custom Service 73
- 5-8 Fine-Tuning Your Network 74
- Figure 5-2 74
- Figure 5-3 74
- Configuring Port Triggering 75
- 5-10 Fine-Tuning Your Network 76
- Figure 5-4 76
- Fine-Tuning Your Network 5-11 77
- Figure 5-5 77
- Using Universal Plug and Play 78
- Fine-Tuning Your Network 5-13 79
- Figure 5-7 79
- 5-14 Fine-Tuning Your Network 80
- Changing the MTU Size 81
- Technologies 82
- Fine-Tuning Your Network 5-17 83
- 5-18 Fine-Tuning Your Network 84
- Chapter 6 85
- Viewing the Connection Status 87
- Showing Router Statistics 88
- Figure 6-4 89
- Table 6-3. Router Statistics 89
- Figure 6-5 90
- Updating the Router Firmware 91
- Figure 6-6 92
- Figure 6-7 92
- Figure 6-8 93
- Figure 6-9 93
- Figure 6-10 94
- Chapter 7 97
- Troubleshooting 97
- 7-2 Troubleshooting 98
- Troubleshooting 7-3 99
- 7-4 Troubleshooting 100
- Login Problems 101
- 7-6 Troubleshooting 102
- Troubleshooting PPPoE 103
- 7-8 Troubleshooting 104
- Troubleshooting 7-9 105
- Problems with Date and Time 106
- Troubleshooting 7-11 107
- 7-12 Troubleshooting 108
- Troubleshooting 7-13 109
- 7-14 Troubleshooting 110
- Appendix A 111
- Technical Specifications 111
- A-2 Technical Specifications 112
- General Specifications 113
- A-4 Technical Specifications 114
- Appendix B 115
- Related Documents 115
- B-2 Related Documents 116
© 2020, manymanuals.com. All rights reserved. | 0.856 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals