Netgear N150 Wireless Router WNR1000 User Manual Page 100
- Page / 122
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
N150 Wireless Router WNR1000 User Manual
7-4 Troubleshooting
v1.0, January 2009
The Power light stays amber.
When the router is turned on, the Power light turns amber for about 20 seconds and then turns
green. If the light does not turn green, the router has a problem.
If the Power light is still amber 1 minute after turning on power to the router:
1. Turn the power off and back on to see if the router recovers.
2. Clear the router’s configuration to factory defaults. This will set the router’s IP address to
www.routerlogin.net. This procedure is explained in “Restoring the Default Configuration and
Password” on page 7-12.
If the error persists, you might have a hardware problem and should contact Technical Support.
The Internet light stays amber.
When the router is turned on, the Internet light turns amber for about 20 seconds and then turns
green. If the light does not turn green, the router has a problem.
If the Internet light is still amber 1 minute after turning on power to the router:
1. The Internet is not accessible. Confirm that you have the correct internet setting.
2. Clear the router’s configuration to factory defaults. This will set the router’s IP address to
www.routerlogin.net. This procedure is explained in “Restoring the Default Configuration and
Password” on page 7-12.
3. Turn the power off and back on to see if the router recovers.
The Internet or LAN port lights are not on.
If either the LAN or Internet lights do not light when the Ethernet connection is made, check the
following:
1. Make sure that the Ethernet cable connections are secure at the router and at the computer.
2. Make sure that power is turned on to the connected computer.
3. Be sure you are using Ethernet cables like the cable that was supplied with the wireless router.
See the NETGEAR N150 Wireless Router Setup Manual for instructions.
The Push 'N' Connect (WPS) push-button blinks amber.
If after using the WPS function the push-button blinks amber, check the following:
1. Make sure that you are using the push-button and not the router’s built-in registrar.
- N150 Wireless Router 1
- WNR1000 User Manual 1
- FOR HOME OR OFFICE USE 6
- Contents 7
- About This Manual 11
- How to Use This Manual 12
- How to Print This Manual 12
- Revision History 13
- Chapter 1 15
- Figure 1-1 16
- Figure 1-2 17
- Figure 1-3 17
- Figure 1-4 18
- Figure 1-5 20
- Figure 1-6 22
- Figure 1-7 23
- Figure 1-8 23
- Figure 1-9 24
- Figure 1-10 26
- Chapter 2 27
- Safeguarding Your Network 27
- Safeguarding Your Network 2-3 29
- 2-4 Safeguarding Your Network 30
- Safeguarding Your Network 2-5 31
- 2-6 Safeguarding Your Network 32
- Figure 2-2 32
- Safeguarding Your Network 2-7 33
- 2-8 Safeguarding Your Network 34
- Safeguarding Your Network 2-9 35
- Figure 2-3 35
- Figure 2-4 36
- Figure 2-5 37
- Push Button Configuration 39
- Security PIN Entry 40
- Figure 2-8 41
- Figure 2-9 41
- Configuring the WPS Settings 42
- Figure 2-11 44
- Figure 2-12 45
- Figure 2-13 46
- Backing Up Your Configuration 47
- Understanding Your Firewall 47
- Chapter 3 49
- Figure 3-1 50
- Figure 3-2 51
- Figure 3-3 52
- Scheduling Blocking 53
- Field Description 54
- Figure 3-6 55
- Setting the Time Zone 56
- Chapter 4 57
- Configuring a Device Name 58
- Using Address Reservation 60
- Using a Dynamic DNS Service 61
- Disabling the SPI Firewall 62
- Configuring Static Routes 64
- Figure 4-5 65
- Figure 4-6 66
- Chapter 5 67
- Fine-Tuning Your Network 67
- 5-2 Fine-Tuning Your Network 68
- Fine-Tuning Your Network 5-3 69
- 5-4 Fine-Tuning Your Network 70
- Fine-Tuning Your Network 5-5 71
- 5-6 Fine-Tuning Your Network 72
- Adding a Custom Service 73
- 5-8 Fine-Tuning Your Network 74
- Figure 5-2 74
- Figure 5-3 74
- Configuring Port Triggering 75
- 5-10 Fine-Tuning Your Network 76
- Figure 5-4 76
- Fine-Tuning Your Network 5-11 77
- Figure 5-5 77
- Using Universal Plug and Play 78
- Fine-Tuning Your Network 5-13 79
- Figure 5-7 79
- 5-14 Fine-Tuning Your Network 80
- Changing the MTU Size 81
- Technologies 82
- Fine-Tuning Your Network 5-17 83
- 5-18 Fine-Tuning Your Network 84
- Chapter 6 85
- Viewing the Connection Status 87
- Showing Router Statistics 88
- Figure 6-4 89
- Table 6-3. Router Statistics 89
- Figure 6-5 90
- Updating the Router Firmware 91
- Figure 6-6 92
- Figure 6-7 92
- Figure 6-8 93
- Figure 6-9 93
- Figure 6-10 94
- Chapter 7 97
- Troubleshooting 97
- 7-2 Troubleshooting 98
- Troubleshooting 7-3 99
- 7-4 Troubleshooting 100
- Login Problems 101
- 7-6 Troubleshooting 102
- Troubleshooting PPPoE 103
- 7-8 Troubleshooting 104
- Troubleshooting 7-9 105
- Problems with Date and Time 106
- Troubleshooting 7-11 107
- 7-12 Troubleshooting 108
- Troubleshooting 7-13 109
- 7-14 Troubleshooting 110
- Appendix A 111
- Technical Specifications 111
- A-2 Technical Specifications 112
- General Specifications 113
- A-4 Technical Specifications 114
- Appendix B 115
- Related Documents 115
- B-2 Related Documents 116
© 2020, manymanuals.com. All rights reserved. | 0.742 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals