Netgear DG834 User Manual download pdf (Page 4)

Reference Manual for the ADSL Modem Router DG834

2-4 Introduction

v2.1, November 2005

• Automatic Configuration of Attached PCs by DHCP

The DG834 dynamically assigns network configuration information, including IP, modem

router, and domain name server (DNS) addresses, to attached PCs on the LAN using the

Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies configuration

of PCs on your local network.

• DNS Proxy

When DHCP is enabled and no DNS addresses are specified, the modem router provides its

own address as a DNS server to the attached PCs. The modem router obtains actual DNS

addresses from the ISP during connection setup and forwards DNS requests from the LAN.

• Classical IP (RFC 1577)

Some Internet service providers, in Europe for example, use Classical IP in their ADSL

services. In such cases, the modem router is able to use the Classical IP address from the ISP.

• PPP over Ethernet (PPPoE)

PPP over Ethernet is a protocol for connecting remote hosts to the Internet over an ADSL

connection by simulating a dial-up connection. This feature eliminates the need to run a login

program such as EnterNet or WinPOET on your computer.

• PPP over ATM (PPPoA)

PPP over ATM is a protocol for connecting remote hosts to the Internet over an ADSL

connection by simulating an ATM connection.

• Dynamic DNS

Dynamic DNS services allow remote users to find your network using a domain name when

your IP address is not permanently assigned. The modem router contains a client that can

connect to many popular Dynamic DNS services to register your dynamic IP address.

• Universal Plug and Play (UPnP)

UPnP is a networking architecture that provides compatibility between networking

technologies. UPnP compliant routers provide broadband users at home and small businesses

with a seamless way to participate in online games, videoconferencing and other peer-to-peer

services.

1 2 3 4 5 6 7 8 9 10

No comments

Netgear DG834 User Manual Page 4