Netgear D7000 User Manual download pdf (Page 11)

Join the WiFi Network

You can either use Wi‑Fi Protected Setup (WPS) or select your WiFi

network and type its password. For help with the WPS button on

your computer or WiFi device, check the instructions or online help

that came with that computer or device. Some older equipment

cannot use WPS.

¾ To join the network using WPS:

1. Press the WPS button on the modem router for 3–5 seconds.

The WPS LED on the modem router blinks white.

2. Within two minutes, on your computer or WiFi device, press its

WPS button or click its onscreen WPS button.

The WPS LED on the modem router lights solid white when the

computer or WiFi device connects to your modem router.

3. Repeat this process to add other computers or WiFi devices.

¾ To select your network and enter its password:

1. Open the software utility that manages your WiFi connections

on the computer or WiFi device that you want to connect to

your modem router.

This utility scans for WiFi networks in your area.

2. Find and select your modem router’s WiFi network name (SSID).

The SSID is on the product label.

3. Enter the modem router’s password (or your custom password

if you changed it) and click the Connect button.

The password is on the product label.

4. Repeat Step 1 through Step 3 to add other computers or WiFi

devices.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

No comments

Netgear D7000 User Manual Page 11